You are here: Home / Help Center / DSL Support / DSL Modem Setup / Actiontec Q1000

Actiontec Q1000

by tcitg — last modified Sep 05, 2014 05:17 PM
Modem Setup
  1. After the computer is connected to the DSL modem, open a Web browser (e.g., Internet Explorer, Firefox) and enter http://192.168.0.1 in the Address field. Press Enter/Return on the keyboard.
    browserbig-png
  2. Click the red Advanced Setup icon and on the left Navigation Bar, select WAN Settings:
    1. Under #1 select PPPoE and check the box PPP Auto Connect.
    2. Under #2 enter your username and password.
    3. Under #3 verify that Dynamic IP is selected
    4. Under #4 verify that Dynamic DNS is selected.
    5. Under #5 verify that LLC (Default) is selected.
    6. Under #6 click the Apply button.
      configQ1000.jpg
    7. Please note that it can take a few minutes for the settings to take effect.
  3. After the settings have been applied and the page reappears, at the bottom of the left-hand navigation panel under Security click on UPnP.  Click to disable UPnP for security and then click Apply and wait for the settings to take effect.

    Disabling UPnP in DSL Modems