by tcitg — last modified Aug 23, 2016 04:52 PM
- After the computer is connected to the M1000 DSL modem, open a Web browser (e.g., Internet Explorer, Firefox) and enter http://192.168.0.1 in the Address field. Press Enter/Return on the keyboard.
- Click the Quick Setup tab. Enter the PPP User Name and Password provided by OlympusNet, and click Apply. Advanced settings should not be needed, but are shown in Step 3 if it does not connect as it should.
- On the WAN IP Address page configure as follows:
Under #1 select PPPoE and verify that PPP auto Connect is selected.
Under #2 enter your DSL PPP username and password provided by OympusNet.
Under #3 verify that Dynamic IP-DHCP(Default) is selected.
Under #4 verify that Dynamic DNS Addresses(Default)
Under #5 verify that LLC Bridged is selected
Under #6 click the Apply button.
Your DSL is ready when the Internet LED turns green.