You are here: Home / Help Center / DSL Support / DSL Modem Setup / 2wire


by tcitg — last modified Sep 05, 2014 05:17 PM
Modem Setup
  1. After the computer is connected to the 2Wire 2700 DSL modem, open a Web browser (e.g., Internet Explorer, Firefox) and enter in the Address field of the browser. Press Enter/Return on the keyboard.
  2. Click the red Advanced Setup icon and select WAN IP Address in the navigation bar on the left, under IP Addressing:
    1. Under #1 Select PPPoE.
    2. Under #2 Enter your PPP username and password.
    3. Under #3 verify that Dynamic IP-DHCP(Default) is selected
    4. Under #4 verify that DNS Addresses(Default) is selected.
    5. Click the Apply button.